As Seen on middleeast-business.com – October 25, 2016
Supported by the Royal Commission for Jubail and Yanbu, and organised by Advanced Conferences & Meetings, RetrofitTech KSA Seminar was successfully launched at The Radisson Blu Hotel, Riyadh. The first edition of this seminar was aiming to explore the challenges and opportunities in KSA’s emerging retrofitting and refurbishment industry to achieve energy efficiency goals.
Topics: Armstrong Fluid Technology, In The Media
Armstrong Fluid Technology is hosting two conferences during November 2016 focusing on the latest energy saving HVAC approaches for the UK’s city buildings.
The events are scheduled for:
London: November 3rd, 2016
12pm - 5pm
Canada House
5 Trafalgar Square SW1Y 5BJ
(in partnership with the High Commission of Canada)
Manchester: November 8, 2016
12pm - 5pm
Etihad Stadium
Ashton New Road, Manchester M11 3FF
Topics: Events, Sustainability, In The Media
Some pump manufacturers standardise on a set range of pump impeller sizes and round up to the nearest size for your required duty. This oversizing builds in inefficiency from the start and clocks up energy wastage with every revolution. Insist on having your pump impellers trimmed by the manufacturer to optimise motor power and drive out these wasteful practice.
Topics: Energy, In The Media
As seen on bsee.co.uk – October 13, 2016
Armstrong Fluid Technology is hosting two conferences this month (November) focusing on the latest energy saving HVAC approaches for the UK’s city buildings.
The events are scheduled for:
London: November 3rd, 2016, 12pm – 5pm, Canada House, 5 Trafalgar Square SW1Y 5BJ (in partnership with the High Commission of Canada).
Manchester: November 8, 2016, 12pm – 5pm, Etihad Stadium, Ashton New Road, Manchester M11 3FF.
Topics: Armstrong Fluid Technology, Sustainability, In The Media
As seen on maintenanceengineering.skoopr.com – Sept. 19, 2016
PARSIPPANY, N.J. —The Hydraulic Institute announced that member company Armstrong Fluid Technology is the latest company to have its pump test laboratory approved through the HI Pump Test Lab Approval Program. The approved pump test lab is located at 23 Bertrand Ave., Toronto, Ontario, Canada M1L 2P3. The HI program assists pump original equipment manufacturers (OEMs) and other pump test laboratories with improving their current laboratory procedures and policies…
Topics: Armstrong Fluid Technology, In The Media
As Seen on acr-news.com – September 12, 2016
Packaged chilled water plant rooms supplied by Armstrong Fluid Technology are contributing to outstanding energy efficiency at a major new Digital Realty data centre facility in south east Asia.
The plant rooms incorporate latest generation chilled water control technology which optimises PUETM (Power Usage Effectiveness), ensuring excellence in environmental performance. As the plant rooms were off-site manufactured and tested at Armstrong’s factory, they also reduced installation times for the project, and will ensure maximum system integrity and reliability throughout their lifetimes.
Topics: chilled water plant, Datacenter, In The Media
As Seen on beforeitsnews.com – September 1, 2016
MarketStudyReport.com adds “Global Circulator Pump Market Outlook 2016-2021” new report to its research database. The report spread across 127 pages with table and figures in it.
This report provides detailed analysis of worldwide markets for Circulator Pump from 2011-2016, and provides extensive market forecasts (2016-2021) by region/country and subsectors. It covers the key technological and market trends in the Circulator Pump market and further lays out an analysis of the factors influencing the supply/demand for Circulator Pump, and the opportunities/challenges faced by industry participants. It also acts as an essential tool to companies active across the value chain and to the new entrants by enabling them to capitalize the opportunities and develop business strategies.
Topics: In The Media
As Seen on empoweringpumps.com – August 30, 2016
I can’t juggle. I can’t act. I can’t sing. But if I could upload a video of myself doing all three things just to raise money to help people gain access to clean water, I’d do all three in a heartbeat. Currently, this is an opportunity open to the employees at Armstrong Fluid Technology.
Topics: Armstrong Fluid Technology, Awards, In The Media
Armstrong Fluid Technologies Award Write Up - Download
The global consulting firm Frost & Sullivan has recognized Armstrong Fluid Technology for excellence in Product Line Strategy, selecting Armstrong to receive the 2016 Best Practices Award.
Frost & Sullivan, the Growth Partnership Company, works in collaboration with clients to leverage visionary innovation. For more than 50 years, they have been developing growth strategies for companies around the world.
Topics: Armstrong Fluid Technology, In The Media
As Seen on WorldPumps – September, 2016
When a major commercial building in the centre of Birmingham needed to refurbish the site’s HVAC pumping system, Armstrong Fluid Technology came up with an alternative solution which reduced energy consumption and improved efficiency.
The Axis office complex occupies a 178,000 sq. ft site close to Broad Street and Birmingham New Street Station. The 11-storey building has recently undergone a major HVAC refurbishment and Armstrong Fluid Technology was asked to provide a proposal for the project. The existing pumps, which were fixed speed end suction models, were reaching the end of their useful life.
Topics: Armstrong Fluid Technology, Energy Efficient, HVAC, In The Media
