Armstrong In The Media

As Seen on mynewsdesk.com – October 11, 2016.

Rapid industrialization is expected to positively impact the demand for fire pump in the near future. A fire pump is a part of water supply of fire sprinkler systems is run by using electric, diesel or steam. The fire pump is connected to either a static water source (tank, lake, and reservoir) or an underground water supply piping. Generally, it is connected with the public underground water supply pipe or any static water source such as tank, reservoir, and lake. The fire pump machine offers high pressure water flow to the fire sprinkler systems. The fire pump starts working when the fire sprinkler’s pressure drops below a certain set point (threshold). The number of fire pump should be installed depending on the occupancy hazard and the specific fire installation standard. Most of the fire pumps are listed, tested, certified by the accredited laboratories and authorized institutions. According to various research reports, the fire pumps market is anticipated to increase at a significant rate over the forecast period.

As Seen on middleeast-business.com – October 25, 2016

Supported by the Royal Commission for Jubail and Yanbu, and organised by Advanced Conferences & Meetings, RetrofitTech KSA Seminar was successfully launched at The Radisson Blu Hotel, Riyadh. The first edition of this seminar was aiming to explore the challenges and opportunities in KSA’s emerging retrofitting and refurbishment industry to achieve energy efficiency goals.

Armstrong Fluid Technology is hosting two conferences during November 2016 focusing on the latest energy saving HVAC approaches for the UK’s city buildings.

The events are scheduled for:

London: November 3rd, 2016
12pm - 5pm
Canada House
5 Trafalgar Square  SW1Y  5BJ
(in partnership with the High Commission of Canada)

Manchester: November 8, 2016
12pm - 5pm
Etihad Stadium
Ashton New Road, Manchester  M11 3FF

#10: Is your pump manufacturer building inefficiency into your project with standardised pump impeller sizes?

Some pump manufacturers standardise on a set range of pump impeller sizes and round up to the nearest size for your required duty. This oversizing builds in inefficiency from the start and clocks up energy wastage with every revolution. Insist on having your pump impellers trimmed by the manufacturer to optimise motor power and drive out these wasteful practice.

As seen on bsee.co.uk – October 13, 2016

Armstrong Fluid Technology is hosting two conferences this month (November) focusing on the latest energy saving HVAC approaches for the UK’s city buildings.

The events are scheduled for:

London: November 3rd, 2016, 12pm – 5pm, Canada House, 5 Trafalgar Square SW1Y 5BJ (in partnership with the High Commission of Canada).

Manchester: November 8, 2016, 12pm – 5pm, Etihad Stadium, Ashton New Road, Manchester M11 3FF.

As seen on maintenanceengineering.skoopr.com – Sept. 19, 2016

PARSIPPANY, N.J. —The Hydraulic Institute announced that member company Armstrong Fluid Technology is the latest company to have its pump test laboratory approved through the HI Pump Test Lab Approval Program. The approved pump test lab is located at 23 Bertrand Ave., Toronto, Ontario, Canada M1L 2P3. The HI program assists pump original equipment manufacturers (OEMs) and other pump test laboratories with improving their current laboratory procedures and policies…

As Seen on acr-news.com – September 12, 2016

As Seen on beforeitsnews.com – September 1, 2016

MarketStudyReport.com adds “Global Circulator Pump Market Outlook 2016-2021” new report to its research database. The report spread across 127 pages with table and figures in it.

This report provides detailed analysis of worldwide markets for Circulator Pump from 2011-2016, and provides extensive market forecasts (2016-2021) by region/country and subsectors. It covers the key technological and market trends in the Circulator Pump market and further lays out an analysis of the factors influencing the supply/demand for Circulator Pump, and the opportunities/challenges faced by industry participants. It also acts as an essential tool to companies active across the value chain and to the new entrants by enabling them to capitalize the opportunities and develop business strategies.

As Seen on empoweringpumps.com – August 30, 2016

I can’t juggle. I can’t act. I can’t sing. But if I could upload a video of myself doing all three things just to raise money to help people gain access to clean water, I’d do all three in a heartbeat. Currently, this is an opportunity open to the employees at Armstrong Fluid Technology.

Armstrong Fluid Technologies Award Write Up - Download

The global consulting firm Frost & Sullivan has recognized Armstrong Fluid Technology for excellence in Product Line Strategy, selecting Armstrong to receive the 2016 Best Practices Award.

Frost & Sullivan, the Growth Partnership Company, works in collaboration with clients to leverage visionary innovation. For more than 50 years, they have been developing growth strategies for companies around the world.