As seen on bsee.co.uk – October 13, 2016
Armstrong Fluid Technology is hosting two conferences this month (November) focusing on the latest energy saving HVAC approaches for the UK’s city buildings.
The events are scheduled for:
London: November 3rd, 2016, 12pm – 5pm, Canada House, 5 Trafalgar Square SW1Y 5BJ (in partnership with the High Commission of Canada).
Manchester: November 8, 2016, 12pm – 5pm, Etihad Stadium, Ashton New Road, Manchester M11 3FF.
Topics: Armstrong Fluid Technology, Sustainability, In The Media
As seen on maintenanceengineering.skoopr.com – Sept. 19, 2016
PARSIPPANY, N.J. —The Hydraulic Institute announced that member company Armstrong Fluid Technology is the latest company to have its pump test laboratory approved through the HI Pump Test Lab Approval Program. The approved pump test lab is located at 23 Bertrand Ave., Toronto, Ontario, Canada M1L 2P3. The HI program assists pump original equipment manufacturers (OEMs) and other pump test laboratories with improving their current laboratory procedures and policies…
Topics: Armstrong Fluid Technology, In The Media
As Seen on empoweringpumps.com – August 30, 2016
I can’t juggle. I can’t act. I can’t sing. But if I could upload a video of myself doing all three things just to raise money to help people gain access to clean water, I’d do all three in a heartbeat. Currently, this is an opportunity open to the employees at Armstrong Fluid Technology.
Topics: Armstrong Fluid Technology, Awards, In The Media
Armstrong Fluid Technologies Award Write Up - Download
The global consulting firm Frost & Sullivan has recognized Armstrong Fluid Technology for excellence in Product Line Strategy, selecting Armstrong to receive the 2016 Best Practices Award.
Frost & Sullivan, the Growth Partnership Company, works in collaboration with clients to leverage visionary innovation. For more than 50 years, they have been developing growth strategies for companies around the world.
Topics: Armstrong Fluid Technology, In The Media
As Seen on WorldPumps – September, 2016
When a major commercial building in the centre of Birmingham needed to refurbish the site’s HVAC pumping system, Armstrong Fluid Technology came up with an alternative solution which reduced energy consumption and improved efficiency.
The Axis office complex occupies a 178,000 sq. ft site close to Broad Street and Birmingham New Street Station. The 11-storey building has recently undergone a major HVAC refurbishment and Armstrong Fluid Technology was asked to provide a proposal for the project. The existing pumps, which were fixed speed end suction models, were reaching the end of their useful life.
Topics: Armstrong Fluid Technology, Energy Efficient, HVAC, In The Media
As Seen on plumbingengineer.com – August, 2016
Since 2008, Armstrong Fluid Technology has been spreading the word about how its Design Envelope technology when applied to HVAC and fluid flow systems achieves high efficiency, and low installed cost, operating cost, environmental cost, and project operating risk. As a result, energy has become an integral part of Armstrong’s conversations. So, it was fitting that from June 27-29, the company gathered nearly 300 attendees from around the world for its biennial summit themed, “Making Energy Make Sense.”
Topics: Armstrong Fluid Technology, In The Media, Summit
As seen on facilitiesnet.com – July 2016
By Rita Tatum July 2016
Once it has been designed and installed, the HVAC system is something the facility manager has to live with for a long time. Heating and cooling equipment has a long life cycle, and because of the cost of replacement, it may well be kept in service even after the end of its projected useful life.
Topics: Armstrong Fluid Technology, HVAC, In The Media
As seen in Plumbing Engineer Magazine - May 2016 issue
and also online at www.plumbingengineer.com
By Bob Miodonski
Contractors must view total system to achieve optimal efficiency, comfort
Armstrong’s Design Envelope pump technology targets better performance and lower installed costs.
Plumbing & Mechanical interviewed Lex van der Weerd, CEO of Armstrong Fluid Technology, Feb. 22 at the company’s headquarters in Toronto. In 2011, van der Weerd became the first non-family member to lead the company. Before joining Armstrong, he spent almost five years as president of Belimo’s American operations. He previously was with Carrier Corp. for 16 years in general management positions in Europe, Asia and the United States.
Topics: Armstrong Fluid Technology, In The Media
As seen on plumbingengineer.com– May 2016
A transportation facility case study.
Edmonton International Airport is the primary air passenger and air cargo facility in the Edmonton region of the Canadian province of Alberta, serving over 6.6 million passengers annually. In 2009, the Edmonton Regional Airports Authority launched an expansion project aimed at increasing capacity. The project involved fast-tracking the development of the HVAC system to accommodate new construction.
Topics: Armstrong Fluid Technology, HVAC, In The Media
As seen on heatinghelp.com – March 28, 2016
Topics: Armstrong Fluid Technology, In The Media
